Advanced Menu; Configure Sata As; Fan Calibration; Battery Calibration - TabletKiosk Sahara Slate PC i500 User Manual

Advanced Menu

Aptio Setup Utility - Copyright (c) 2009 American Megatrends, Inc.
Main Advanced Boot Security
Advanced Setting
Configure SATA as

Fan Calibration

Battery Calibration

Wake up function

Wake on LAN from S4/S5 mode

Programmable Button Setting
3rd Programmable button
4th Programmable button

Trusted Computing

Version 2.00.1201. Copyright (c) 2009 American Megatrends, Inc.
Configure SATA as
Sets SATA mode to IDE, AHCI, or RAID. Mode should be set to
AHCI to use Solid State Drives (SSD).
FAN Calibration
Starts fan calibration test for more efficient system cooling.
Factory default should be proper. Only run this test if system has
overheating issues or fan begins to run constantly.
Battery Calibration
Starts battery calibration test to check battery capacity and
charge/discharge levels for more accurate battery status.
Wake on LAN from S4/S5 mode
Enables/Disables system to wake from low power state by LAN
requests.
3rd & 4th Programmable button
Sets 3rd and 4th function buttons on the left side of the Tablet
PC to adjust either the Speaker Volume or Screen Brightness.
Trusted Computing
Enables/Disables and sets state of the Trusted Platform Module.
138 Appendix A: BIOS Set-up
Save & Exit
(1) IDE Mode. (2) AHCI Mode.
(3) RAID Mode.
[AHCI Mode]
[Enable]
[Volume up]
[Volume down]
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Value
F3: Optimized Defaults
f4: Save ESC: Exit