Initializing Tpm; Turning On The Tpm - TabletKiosk Sahara Slate PC i500 User Manual

Initializing TPM

The first thing you must do in order to begin securing your
computer is to initialize the TPM. This requires first turning on
the TPM and then taking ownership of the TPM.

Turning on the TPM

The first step is to turn on the TPM in the system's BIOS.
NOTE: The function keys on your Sahara Slate PC act as navigation
keys in the BIOS. To make the instructions easier to follow, the keys
will be shortened to L1-4 and R1-4 to represent the first through fourth
buttons on both the left and right sides of the system, with 1 being
the top most button on a given side and 4 being the bottom. So, L1 is
the top button on the left side of the Tablet PC, while R4 would be the
bottom button on the right side.
1. Power on or restart your Sahara Slate PC.
2. As soon as the TabletKiosk logo appears on the screen
press the Screen Rotation (L2) button on the left side of the
system.
3. When the BIOS appears, press L3 to go to the Advanced
Menu and then go down to the Trusted Computing item by
pressing L4 six times.
Aptio Setup Utility - Copyright (c) 2009 American Megatrends, Inc.
Main Advanced Boot Security
Advanced Setting
Configure SATA as
Fan Calibration
Battery Calibration
Wake up function
Wake on LAN from S4/S5 mode
Programmable Button Setting
3rd Programmable button
4th Programmable button
Trusted Computing
Version 2.00.1201. Copyright (c) 2009 American Megatrends, Inc.
4. Enter the Trusted Computing screen by pressing R2.
5. With the TPM SUPPORT option highlighted, press R2.
Highlight "Enable" by pressing L4 and then R2. The TPM
SUPPORT entry should now read "Enable".
98 Chapter 05: Securing Your Sahara Slate PC
Save & Exit
(1) IDE Mode. (2) AHCI Mode.
(3) RAID Mode.
[AHCI Mode]
[Enable]
[Volume up]
[Volume down]
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Value
F3: Optimized Defaults
f4: Save ESC: Exit