Step 4: Powering On The Sahara Slate Pc; Step 5: Completing The Operating System Installation; Step 6: Navigating With The Touch Screen And Digitizer (Pen) - TabletKiosk Sahara Slate PC i500 User Manual

to the Internet and/or a corporate LAN using a wired connection
as opposed to wirelessly, connect the external peripheral or
cable now. See the chapter entitled Touring Your Sahara Slate
PC, to identify which ports to use.

Step 4: Powering on the Sahara Slate PC

Locate the three power switches on the top of the Tablet PC.
The switch is the computer's main power toggle. Slide it to
the right and hold it there for three (3) seconds and release. The
switch will then emit a blue glow and the Sahara Slate PC will
boot up.
Press and hold the power switch on the
top of the Tablet PC for three seconds
or until the switch glows blue. The
system should then boot up.

Step 5: Completing the Operating System Installation

When your system powers on for the first time, Windows will
have a few questions for you to answer in order to localize your
installation. If you are planning on using the Fingerprint Reader
to assist you in securing your system and logging in, you should
create a password when you make your initial user account.
Refer to your operating system's manual for information on any
of the questions you are unsure how to answer.

Step 6: Navigating with the Touch Screen and Digitizer (pen)

Unlike a regular laptop or desktop PC, standard navigational
activities on a Tablet PC are typically completed using your
Once the system is powered on, the
power switch will glow blue and the
battery indicators will light up (green if
the battery is fully charged, orange if it
is charging).
Chapter 01: Getting Started 21