Table of Contents
Advertisement
Chapter
4
Twinax Interface Menu
Maximum Printable Width
MAXIMUM PRINTABLE WIDTH sets the maximum width of the printer when
using a CT host interface.
•
13.2 Inches (the default)
•
13.6 Inches
NOTE: The twinax interface menu and coax interface menu option for
Hex Print Mode
When enabled, the HEX PRINT MODE parameter prints the EBCDIC data
and control codes received from the host as hex values.
•
Disable (the default)
•
Enable
Refer to page 274 to obtain a hex code printout.
NOTE: Printing in Hex Mode may alter print attributes set by the host
124
maximum printable width use the same internal variable. Setting this
option in either menu will make it the current setting for the printer,
independent of the interface used.
Although the LP+ emulation maintains width in characters, the
maximum printable width in characters is controlled by the same
internal variable that is set by the twinax interface menu and coax
interface menu option for maximum printable width option.
computer. A power cycle may be required after changing HEX PRINT
MODE from enable to disable.
Advertisement
Table of Contents
