Table of Contents
Advertisement
3. Connect the customer supplied interface cable from the host computer to
the appropriate printer interface connector (refer to Figure 27 through
Figure 32).
4. Thread the power cable connector up through the notch in the lower-right
back corner of the cabinet (see Figure 31). Plug the power cord into the
printer AC power connector, then into the AC power outlet.
Host Interface
Connectors
I/O Connector
I/O Cover
Cable-Routing
Notches
NOTE:
(1)
The Dataproducts adapter feature attaches to the PC
Parallel interface connector.
(2)
Twinax, Coax, and Ethernet Interfaces appear only if these
features are installed.
Figure 27. Internal Back View of the Cabinet Model Showing Interface and Power Cable
Connect The Interface And Power Cables (Cabinet Models)
Connections
Setting Rear Paper Exit
Power
Switch
AC Power
Connector
AC Power
Cable
53
Advertisement
Table of Contents
