Chapter
2
Remove Shipping Restraints (Cabinet Model)
Remove The Cardboard Packing And Envelope
Cardboard
Packing (2)
Figure 6. Removing the Cardboard Packing and Sample Configuration Printout
1. Raise the printer cover.
2. Remove the cardboard packing.
3. Open the tractor doors.
4. Push the tractor locks down.
5. Slide the tractors outward as far as they will go. The forms thickness lever
should be in the fully open (raised) position.
6. Remove the envelope that contains the sample configuration printout.
7. Store this in the pouch that is attached to the left interior side of the
cabinet.
34
Envelope
Forms Thickness
Lever