IBM 6400i Setup Manual page 216

Chapter 4
Code V Feature (VGL)
Bar Code Errors
•
•
Character Filtering
Ignore Characters
Determines if character filtering is enabled, or if one or both characters are
ignored.
•
•
•
•
Select Character 1
Selects character 1 for the character filtering option.
•
0 (the default)
•
0 – 255 (decimal)
Select Character 2
Selects character 2 for the character filtering option. Valid values are from 0
through 255 (decimal).
•
0 (the default)
•
0 – 255 (decimal)
216
Enable (the default). Prints an error message when invalid bar code
data is encountered.
Disable. Does not print an error for invalid bar code data and the bar
code will be printed as is.
Disable (the default). Does not ignore the characters selected with
the select character options.
Character 1. The character selected using the Select Character 1
option will be ignored in the data string.
Character 2. The character selected using the Select Character 2
option will be ignored in the data string.
Character 1 and 2. Both characters selected using the Select
Character 1 and Select Character 2 options will be ignored in the data
string.