Chapter
4
Code V Feature (VGL)
Ignore Spaces
•
Disable (the default). Trailing spaces are NOT deleted from
alphanumeric elements in a graphics pass.
•
Enable. Trailing spaces are deleted from alphanumeric elements in a
graphics pass.
Midline PY
•
Enable (the default). Allows printable characters to precede the ^PY
command.
•
Disable. Requires the ^PY command to be the first characters on a line.
Dark Barcode
•
Disable (the default). Bar codes are printed in normal mode.
•
Enable. When enabled, prints all bar codes in a dark mode.
Expanded Font
•
Block (the default). These are block characters compatible with the IGP-
X00 printers.
•
Scalable. These expanded characters have rounded edges.
LP+ Font
•
Disable. The IGP/VGL uses its default half-dot font, which is slightly
different from the standard bitmap font used by LP+ at 12, 13, 15 and 17
cpi.
•
Enable. The IGP/VGL uses the same font as used by LP+ at all cpi.
Width Limit
•
Disable (the default). This does not limit the width of expanded
characters.
•
Enable. When enabled, limits the width of expanded characters based on
a fixed maximum ratio of width over height.
Absorb at ^PN
•
Disable (the default). When disabled, system terminators following the
(cc)PN command are sent to the printer and result in paper motion.
•
Enable. Prevents paper motion following the (cc)PN command.
214