Table of Contents
Advertisement
Fault Message
P17 SECURITY VIOLATION
PLEASE WAIT...
RESET IN PROGRESS
PRINTER UNDER REMOTE
CONTROL
READY
RIBBON INK OUT
CHANGE RIBBON
SERVICE MENU
<first service test>
TESTING HARDWARE
PLEASE WAIT
TOP OF FORM SET
Table 12: Fault Messages
Operator
Explanation
Correctable?
No
Security code of PAL on
controller board does not
match code of firmware
on the controller board.
N/A
Printer reset in progress.
Yes
Indicates that remote
management software
has control of the printer.
N/A
Printer state message:
printer is online and in
communication with
host.
Yes
RibbonMinder has
determined that the
ribbon is out of ink.
N/A
Non–error status
message.
N/A
Status message when
printer runs self–tests
and initialization
routines.
N/A
Non–error status
message.
Fault Correction Procedure
Solution
Contact your IBM service
representative.
No action necessary.
No action necessary.
No action necessary.
Replace the ribbon and
verify ribbon life is reset to
100%.
No action necessary.
No action necessary.
No action necessary.
287
Advertisement
Table of Contents
