Data Bit 8
•
Enable (the default). The PI line is not passed directly from host to
printer; all 8 bits are used for data bits, and characters in the 80-FF
hex range can be accessed.
•
Disable. When the host PI line is enabled, indicates PI line status. To
use the PI line, disable data bit 8, and enable the Host PI
configuration option.
NOTE: Data bit 8 is interpreted as either data bit 8 or PI signal, but never
both. When enabled as data bit 8, data bit 8 has priority over the PI
signal, and all data above 7F hex is used to access character data
and not to interpret PI line data.
Conversely, when data bit 8 is disabled and the PI signal is used,
data bit 8 of the data is reserved for use as the PI function, and you
cannot access characters in the 80-FF hex range. Therefore, to
access characters in the 80-FF hex range, data bit 8 must be
enabled.
Font Set
This parameter allows you to select a font for the Code V feature. Valid
selections are 0 to 32. The following predefined values are available:
•
0
U.S. ASCII (the default)
•
1
German
•
2
Swedish
•
3
Danish
•
4
Norwegian
•
5
Finnish
•
6
English
•
7
Dutch
•
8
French
•
9
Spanish
•
10
Italian
•
11
Turkish
•
12
Japanese
•
13-23
Reserved
•
24-31
User Defined Sets
•
32
0858 PC Euro Multilingual
•
33
0923 Latin 9 8859-15 Euro
Code V Emulation Menu
217