Panel Flush Mounting - Siemens SIPROTEC 4 Manual

Mounting and Commissioning
3.1 Mounting and Connections
[front-7sj80-mit-abdeckungen-20071107, 1, --_--]
Figure 3-11
[front-7sj80-ohne-abdeckungen-20071107, 1, --_--]
Figure 3-12
3.1.3.2

Panel Flush Mounting

The housing (housing size
•
Remove the 2 covers at the top and bottom of the front cover. Thus, 4 elongated holes are revealed in
the mounting bracket and can be accessed.
•
Insert the device into the panel cut-out and fasten it with four screws. For dimensional drawings, refer to
Section 4.25
•
Mount the 2 covers again.
324
Housing with covers
Housing with fixing holes (without covers)
1 / ) has 2 covers and 4 fixing holes.
6
Dimensions.
SIPROTEC 4, 7SJ80, Manual
E50417-G1140-C343-A8, Edition 12.2017