Set Points For Measured Values - Siemens SIPROTEC 4 Manual

No. Information
854 Ib Max=
855 Ic Min=
856 Ic Max=
857 I1 Min=
858 I1 Max=
859 Va-nMin=
860 Va-nMax=
861 Vb-nMin=
862 Vb-nMax=
863 Vc-nMin=
864 Vc-nMax=
865 Va-bMin=
867 Va-bMax=
868 Vb-cMin=
869 Vb-cMax=
870 Vc-aMin=
871 Vc-aMax=
872 Vn Min =
873 Vn Max =
874 V1 Min =
875 V1 Max =
876 Pmin=
877 Pmax=
878 Qmin=
879 Qmax=
880 Smin=
881 Smax=
882 fmin=
883 fmax=
884 PF Max=
885 PF Min=
1058 Θ/ΘTrpMax=
1059 Θ/ΘTrpMin=
2.23.6

Set Points for Measured Values

SIPROTEC devices facilitate the setting of limit values for some measured and metered values. If any of these
limit values is reached, exceeded or fallen below during operation, the device issues an alarm which is indi-
cated in the form of an operational message. This can be allocated to LEDs and/or binary outputs, transferred
via the interfaces and linked in DIGSI CFC. The limit values can be configured via DIGSI CFC and allocated via
the DIGSI device matrix.
SIPROTEC 4, 7SJ80, Manual
E50417-G1140-C343-A8, Edition 12.2017
Type of Comments
Informa-
tion
MVT Ib Max
MVT Ic Min
MVT Ic Max
MVT I1 (positive sequence) Minimum
MVT I1 (positive sequence) Maximum
MVT Va-n Min
MVT Va-n Max
MVT Vb-n Min
MVT Vb-n Max
MVT Vc-n Min
MVT Vc-n Max
MVT Va-b Min
MVT Va-b Max
MVT Vb-c Min
MVT Vb-c Max
MVT Vc-a Min
MVT Vc-a Max
MVT V neutral Min
MVT V neutral Max
MVT V1 (positive sequence) Voltage Minimum
MVT V1 (positive sequence) Voltage Maximum
MVT Active Power Minimum
MVT Active Power Maximum
MVT Reactive Power Minimum
MVT Reactive Power Maximum
MVT Apparent Power Minimum
MVT Apparent Power Maximum
MVT Frequency Minimum
MVT Frequency Maximum
MVT Power Factor Maximum
MVT Power Factor Minimum
MVT Overload Meter Max
MVT Overload Meter Min
Functions
2.23 Auxiliary Functions
295