Table of Contents
Advertisement
Display hinges
Description
Display hinges
IMPORTANT:
and replacement
Before removing the display hinges, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Hinge covers (see
b.
System support brackets (see
c.
Fans (see
d.
Heat sink (see
e.
System board (see
f.
Display assembly (see
g.
Display bezel (see
Remove the display hinges:
1.
Remove the six Phillips broadhead 2.4×3.2 screws (1) securing the hinges to the display assembly.
68
Chapter 6 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Battery on page
Hinge covers on page
Fans on page
49).
Heat sink on page
System board on page
Display assembly on page
Display bezel on page
36), and then remove the following components:
45).
System support brackets on page
53).
58).
61).
66).
Spare part number
929464-001
46).
Hide quick links:
Advertisement
Table of Contents
