Polar Electro Vantage V User Manual page 115

Use the USB cable included in the product set to charge it via the USB port on your computer. You can
also charge the battery via a wall outlet. When charging via a wall outlet, use a USB power adapter (not
included in the product set).
You can charge the battery via a wall outlet. When charging via a wall outlet, use a USB power adapter
(not included in the product set). If you use a USB power adapter, make sure that the adapter is marked
with "output 5Vdc" and that it provides a minimum of 500mA. Only use an adequately safety approved
USB power adapter (marked with "LPS", "Limited Power Supply", "UL listed" or "CE").
Do not charge Polar products with a 9 volt charger. Using a 9 volt charger can damage your Polar
product.
To charge with your computer, just plug your watch to your computer, and at the same time, you can
have it synced it with FlowSync.
1. To charge your watch, plug it into a powered USB port or a USB charger with the custom cable
that came in the box. The cable magnetically snaps into place, just make sure to align the ledge on
the cable with the slot on your watch (marked with red).
2. Charging appears on the display.
3. When the battery icon is full, the watch is fully charged.
115