Building Technologies
HVAC Products
16.2.5 Faults
Main menu > Settings > Faults > Fault input 1 (or 2 , 3 or 4 )
Datapoint name
Fault text 1:
Fault text 2:
Fault text 3:
Fault text 4:
16.2.6 Meters
Main menu > Settings > Data acquisition > Meter 1 (or 2 , 3 or 4 )
Datapoint name
Meter 1:
Meter 2:
Meter 3:
Meter 4:
16.2.7 Devices
Main menu > Settings > Texts
Datapoint name
Device name:
File name:
Display input 1:
Display input 2:
Display input 3:
Display input 4:
Business card line 1:
Business card line 2:
Business card line 3:
Business card line 4:
16.2.8 Menu tree
On the software side, all setting and readout values are arranged as data points (oper-
ating lines) of the menu tree.
Using the operating elements of the operator unit, every operating line can be selected,
displayed or set in accordance with the access right.
The Main menu is subdivided into 18 submenus: The display depends on the products
used and the type of plant:
1.
Commissioning
2.
Boiler sequence manager
3.
Boiler 1
4.
Boiler 2
5.
Boiler 3
6.
Boiler 4
7.
Boiler 5
8.
Boiler 6
9.
Primary controller
Boiler sequence controller RMK770
16 Addendum
Factory setting
[Fault input 1] fault
[Fault input 2] fault
[Fault input 3] fault
[Fault input 4] fault
Factory setting
Meter 1
Meter 2
Meter 3
Meter 4
Factory setting
Dv name
File name
Display input 1
Display input 2
Display input 3
Display input 4
Business card line 1
Business card line 2
Business card line 3
Business card line 4
10. Heating circuit
11. Data acquisition
12. Miscellaneous
13. Time of day/date
14. Faults
15. Settings
16. Device information
17. Data backup
223/232
CE1P3132en
23.04.2009