Insufficient memory to collate job [37]
Try one or more of the following:
•
From the printer control panel, press
collating the rest of the print job.
•
From the printer control panel, press
Insufficient memory to support Resource Save feature [35]
Press
on the printer control panel to clear the light sequence.
The job will be printed without using Resource Save.
Memory full [38]
Try one or more of the following:
•
From the printer control panel, press
•
From the printer control panel, press
•
Install additional printer memory.
•
Decrease the resolution setting.
Complex page, some data may not have printed [39]
Try one or more of the following:
•
From the printer control panel, press
•
From the printer control panel, press
•
Install additional printer memory.
•
Reduce the number and size of fonts, the number and complexity of images, and the number of pages
in the print job.
Too many trays attached [58]
Do the following:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top
to the bottom.
3
Remove the extra tray or trays.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
to print the portion of the job already stored and begin
to cancel the print job.
to continue printing. A data loss will occur.
to cancel the print job.
to continue printing. A data loss may occur.
to cancel the print job.
Diagnostics and troubleshooting
114
4514-2xx