Insufficient Memory Error Messages; Insufficient Memory To Collate Job [37] - Lexmark MS310d Quick Refence Manual

‑ On
If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of
the following:
•
From the printer control panel, press
Note: The printer discards any data received through the USB port.
•
Set the USB Buffer to Auto:
–
If the printer is on a network, then access the Embedded Web Server.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Network/Ports > Standard USB.
3
In the USB Buffer field, enter 2.
4
Click Submit.
–
If the printer is connected to a computer by a USB or parallel cable, then access the USB menu through the Local
Printer Settings Utility for Windows.

Insufficient memory error messages

Insufficient memory to collate job [37]

‑ On
‑ On
to continue printing.
68