37 Insufficient Memory For Flash Memory Defragment Operation; 37 Insufficient Memory To Collate Job; 37 Insufficient Memory, Some Held Jobs Were Deleted; 37 Insufficient Memory, Some Held Jobs Will Not Be Restored - Lexmark T652 Service Manual

37 Insufficient memory for Flash Memory Defragment operation

Try one or more of the following:
•
Press the arrow buttons until
process and continue printing.
•
Delete fonts, macros, and other data in printer memory.
•
Install additional printer memory.

37 Insufficient memory to collate job

Try one or more of the following:
•
Press the arrow buttons until
already stored and begin collating the rest of the print job.
•
Cancel the current print job.

37 Insufficient memory, some held jobs were deleted

The printer deleted some held jobs in order to process current jobs.
Press the arrow buttons until

37 Insufficient memory, some Held Jobs will not be restored

The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Press the arrow buttons until

38 Memory full

Try one or more of the following:
•
Press the arrow buttons until
•
Cancel the current print job.
•
Install additional printer memory.

39 Complex page, some data may not have printed

Try one or more of the following:
•
Press the arrow buttons until
continue printing.
•
Cancel the current print job.
•
Install additional printer memory.
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Diagnostic information
173
to stop the defragment
to print the portion of the job
to clear the message.
to clear the message.
to clear the message.
to clear the message and
4062