Bottom Removals; Power Supply Removal - Lexmark MS310 4514-220 Service Manual

Bottom removals

Power supply removal

1
Remove the left cover. See
2
Remove the rear door and cover. See
3
Disconnect the cable (A) from the rear, and disconnect the cable (B) from the left side.
4
Position the printer so that it sits on its right side.
5
Remove the three screws (C), and then remove the right tray guide.
"Left cover removal" on page
"Rear door and cover removal" on page
A
Parts removal
239
194.
256.
B
C
4514-2xx