30 Invalid Refill, Change Toner Cartridge; 31 Replace Defective Cartridge; 32 Cartridge Part Number Unsupported By Device; 34 Short Paper - Lexmark X46X Series User Manual

Troubleshooting

30 Invalid refill, change toner cartridge

The printer has detected an invalid, refilled toner cartridge. Remove the toner cartridge, and then install a new one.

31 Replace defective cartridge

Remove the defective toner cartridge, and then install a new one.

32 Cartridge part number unsupported by device

Remove the toner cartridge, and then install a supported one.

34 Short paper

Try one or more of the following:
•
Load the appropriate paper or other specialty media in the proper tray.
•
Touch Continue to clear the message and print the job using a different paper tray.
•
Check tray length and width guides and make sure the paper is properly loaded in the tray.
•
Check the Print Properties or Print dialog settings to make sure the print job is requesting the correct paper size
and type.
•
Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper
is large enough for the data being printed.
• Cancel the current print job.

35 Insufficient memory to support Resource Save feature

Try one or more of the following:
•
Touch Continue to disable Resource Save and continue printing.
• To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the
menus to activate the link buffer changes. When Ready appears, enable Resource Save.
• Install additional memory.

37 Insufficient memory to collate job

Try one or more of the following:
•
Touch Continue to print the portion of the job already stored and begin collating the rest of the print job.
• Cancel the current print job.

37 Insufficient memory, some Held Jobs were deleted

The printer deleted some held jobs in order to process current jobs.
Touch Continue to clear the message.
261