Font Sharpening; Parallel Protocol; Parallel Mode 2; Mac Binary Ps - Lexmark MS310 4514-220 Service Manual

Font Sharpening

This allows a user to set a text point-size value below which the high‑frequency screens will be used when
printing font data.
Available options:
•
Off
•
On

Parallel Protocol

This printer supports both the standard and the fastbytes parallel handshaking protocols.
Available options:
•
Standard—The printer can receive information at a normal transmission rate.
•
Fastbytes—The printer can receive information at a much faster transmission rate, provided that the host
computer also supports the fastbytes protocol.

Parallel Mode 2

This determines whether the parallel port data is sampled on the leading or trailing edge of strobe.
Available options:
•
On—Data is sampled on the leading edge of strobe.
•
Off

MAC Binary PS

This configures the printer to process Macintosh binary PostScript print jobs.
Available options:
•
Off—The printer filters PostScript print jobs using standard protocol.
•
On—The printer processes raw binary PostScript print jobs from computers using the Macintosh operating
system. This setting often causes Windows print jobs to fail.
•
Auto—The printer processes print jobs from computers using either Windows or Macintosh operating
systems.

USB Speed

This setting is used to set the throughput of the USB port on the printer.
Available options:
•
Auto
•
Full—Forces the USB port to run at full speed and also disables its high‑speed capabilities.

USB PnP

In some cases, the USB port at the back of the printer may be incompatible with the chipset in a user's PC. This
setting lets the user change the USB driver mode to improve its compatibility with these PCs.
Service menus
167
4514-2xx