Table of Contents
Advertisement
Action
Step 8
Perform the control panel service check. Go to
service check" on page
Does the error remain?
Step 9
Is the LED on the bottom of the controller board illuminating?
Control panel service check
Warning—Potential Damage: Do not replace the operator panel and controller board at the same time. Each
card contains the printer settings. When either of these cards is new, it obtains some of the settings from the
other card. Settings are lost when both are new and replaced at the same time.
Action
Step 1
Check the UICC cable for proper connection to the UICC and to
the controller board.
Is it properly connected?
Step 2
Replace the UICC. Go to
Did this fix the problem?
USB print service check
Action
Step 1
Enter Diagnostic mode and perform a print test to make sure the
printer prints correctly. Verify that the indicator light is on, then print
the Diagnostics menu instruction sheet:
Diagnostics Menu > Print Diagnostics Menu Instruction Sheet
Are the internal pages printing?
Step 2
Verify if the user's applications are setup correctly.
Are they setup correctly?
"Control panel
156.
"UICC removal" on page
Diagnostics and troubleshooting
Yes
Go to step 9.
Go to step 6.
Yes
Go to step 2.
The problem is
solved.
225.
Yes
Go to step 2.
Go to step 4.
156
4514-2xx
No
The problem is
solved.
Replace the
controller board. Go
to
"Controller board
removal" on
page
210.
No
Reseat the cable.
Replace the
controller board. Go
to
"Controller board
removal" on
page
210.
No
Go to step 7.
Go to step 3.
Advertisement
Table of Contents
