Front Bumper Removal / Installation - Polaris 2014 Sportsman 570 EF Service Manual

Front Bumper Removal / Installation

1. Remove front rack / storage box lid as outlined in this
chapter.
2. Disconnect head lamp connectors, leaving the bulb
in the head lamp housing.
3. Remove lower portion of the front bumper by
removing the 4 T27 bolts that attach it to the frame.
Pull bumper strait out to remove.
4. Remove the (2) plastic rivets that attach the upper
front bumper to the front fenders.
5. Remove to (2) T27 bolts that attache the upper front
bumper to the frame.
6. Disengaged the 4 plastic tabs from the front fender
that engage into the upper front bumper by gently
pressing down on the bumper and pulling up on the
front fender.
7. Remove the front bumper by gently the pulling the
lower portion of the bumper away from the vehicle
frame and sliding it down.
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
BODY / STEERING / SUSPENSION
8. To reinstall the front bumper, reverse order of
removal. Be sure that the 4 plastic locking tabs of the
front fender are properly seated into the 4 slots of the
upper front bumper.
9. Torque the (6) T27 fasteners to specification.
© Copyright 2013 Polaris Sales Inc.
T27 Fasteners:
4-6 ft-lbs (6-8 Nm)
5
5.5