Polaris 2014 Sportsman 570 EF Service Manual page 296

FINAL DRIVE
11. Check the action of the torsion spring by rotating in
both directions to ensure the spring and retainer are
installed properly.
12. Be sure the armature plate tabs are fully engaged
into the roll cage assembly and are resting on the
cut-grooves of the ring gear.
NOTE: Verify armature plate tabs are in the slots
on the roll cage and are resting in the ring gear
grooves.
7.14
13. Install the output hub and cover plate assembly with
14. Torque the cover plate bolts to specification.
15. Lay the gearcase on the side with the output cover
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
a new o-ring (arrow) onto the gearcase.
NOTE: Verify the square O-ring (arrow) is placed
flat on the cover surface. If the O-ring is twisted,
fluid leaks may occur.
Output Cover Bolts:
7-11 ft-lbs
facing up.