Polaris 2014 Sportsman 570 EF Service Manual page 374

BRAKES
3. Install brake pads in caliper body with friction
material facing each other. Install the slide pins and
the slide pin retaining rings. Torque the slide pins to
specification.
NOTE: The slide pins should be torqued when
installed on caliper mount.
Slide Pin:
30-35 ft-lbs (41-48 Nm)
9.30
4. Install caliper and torque mounting bolts to
5. Install brake line and tighten securely with a line
6. Follow
7. Field test unit for proper braking action before putting
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
specification.
Caliper Mounting Bolt:
16-18 ft-lbs (22-24 Nm)
wrench. Torque the brake lines to the proper torque
specification.
bleeding procedure
"BLEEDING PROCEDURE" in this chapter.
into service. Inspect for fluid leaks and firm brakes.
Make sure the brake is not dragging when lever is
released. If the brake drags, re-check assembly and
installation.
outlined in the