Pvt System Service; Disassembly - Polaris 2014 Sportsman 570 EF Service Manual

CLUTCHING

PVT SYSTEM SERVICE

Disassembly

Some fasteners and procedures will vary. Refer to the
appropriate parts manual for proper fasteners and
fastener placement.
1. Remove seat, left side panel, left footwell, and left
footwell support to gain access to PVT outer cover
(see Chapter 5 for removal).
2. Remove PVT air inlet and outlet ducts.
3. Remove outer PVT cover screws.
4. Mark the drive belt direction of rotation and remove
drive belt. See "Drive Belt Removal".
Drive Clutch Puller:
(PN 2870506)
Drive Clutch Holder:
(PN 9314177–A)
5. Install the Drive Clutch Holder (PN 9314177–A) and
Remove drive clutch retaining bolt.
NOTE: Discard drive clutch retaining bolt and
replace with new for assembly.
6.10
6. remove drive clutch using the Drive Clutch Puller
7. Remove the driven clutch retaining bolt and driven
8. Remove driven clutch alignment washer(s) from the
9. Remove inner cover retaining bolts and Panduit®
10. Remove cover along with foam seal on back of cover
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
(PN 2870506).
clutch.
transmission input shaft.
strap.
or shaft.