Testing; Replacement - Polaris 2014 Sportsman 570 EF Service Manual

Table of Contents

Testing

Using the special tools listed, test the speed sensor

according to the tester instructions. Remove sensor and

inspect the o-ring seal for damage or wear and replace

as required. Replacement of sensor is required as it is

not serviceable.

Speed Sensor

Test Using Special Tools:

Static Timing Light Harness

Hall Sensor Probe Harness

1. Remove the sensor retaining using a suitable tool.

2. Coat o-ring of new sensor with anti-seize compound

3. Push new sensor into gearcase housing. Install bolt

9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual

and tighten to specification.

Speed Sensor Bolt:

8-12 ft-lbs (11-17 Nm)

Table of Contents