Clutch Assembly - Polaris 2014 Sportsman 570 EF Service Manual

Table of Contents

Clutch Assembly

1. Install a new bearing onto the clutch shaft using an

arbor press. Once bearing is fully seated, install a

new snap ring.

2. Install the shaft and bearing assembly into the outer

NOTE: Press only on the outer race of the

bearing during installation to prevent damaging

the bearing.

9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual

3. Line up the "X" on the moveable sheave with the "X"

on the stationary sheave or use the marks previously

used. Put the sheaves together.

4. Install the roller (A) onto the roller pin (B) on both

Table of Contents