P/N 0527427_M
Gasket
1
Gasket
1
Gasket Location for
End Installation
(see Page 6 for Joining Gasket)
• Do not stretch gasket, especially
around corners.
• Do not butt gaskets; always overlap
them as shown.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
in. (24 mm)
/
5
in. (41 mm)
8
Insert Nut
Retainers
IMPORTANT
Remove
Alignment
Pin
(Left End Only)
• Remove paper backing after gasket
has been applied.
• Perimeter gasket required by NSF.
• End caps required for rail light.
Freedom Line Multi-Deck
1-17