Replacing Led Power Supplies - Hussmann Freedom Line series Installation & Operation Manual

P/N 0527427_M
1. Turn off power to the merchandiser, and
turn canopy light switch off. Unplug the shelf
connector from its socket.
2. Replace with the appropriate Hussmann
LED light bar.
Shelf Light Plug

REPLACING LED POWER SUPPLIES

The LED power supplies for canopy lights and
shelf lights are located at the top of the mer-
chandiser inside the canopy.
6 ft & 8 ft
LH Shelves
12 ft
LH Shelves
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Shelf Light Receptacle
RH Shelves
Center Shelves
LED Power Supply Locations
Canopy and Shelf LED Power Supply Arrangement
1. d
isconnect power to the merchandiser
2. Remove light bars from the canopy.
3. Remove the screws that secure the lamp
panel.
4. Grasp the lamp panel at its front edge and
carefully pull down. It will swing freely from
its hinged rear edge.
Latch Tongue
5. Replace power supply and reassemble parts
in reverse order.
6. Reconnect the electrical power.
Power Supply
Canopy
RH Shelves
Freedom Line Multi-Deck Freedom Line Multi-Deck
6-3
.
Shelf Connector Handle
Crossbar
Canopy