Two-Way Speaker Call - Siemens 300 Series User Manual

Two-Way Speaker Call

To make a two-
way speaker call
3–32 ROLMphone 300/600 User Guide
pressing the line key or the SPEAKER key. If
this party is the last one in the multiple line
appearance, the call is disconnected.
The Two-Way Speaker Call feature lets you make a
two-way call to the speaker of another telephone. If
the other party does not have a speakerphone, they
must pick up the handset to answer.
Press the Two-Way Speaker Call (SPK2WAY)
key.
Dial the extension.
You will hear a single beep. The other party will
hear a double beep.
Begin speaking. If the other party does not have
a speakerphone, they must pick up the handset
to answer. You and the other party will hear
single beeps periodically until the other party
picks up the handset.
To make a two-way call to the speaker of a telephone
within your com group, use the Intercom Call feature.
(See "Community (Com) Group Speaker Call" on
page 3–19.)
You can make a two-way speaker call to a DSS exten-
sion by pressing the Two-Way Speaker Call
(SPK2WAY) key and then pressing the DSS key.
(See "Direct Station Select (DSS)" on page 3–12.)