Removing Yourself From A Hunt Group; Setup - Siemens 300 Series User Manual

Removing Yourself from a Hunt Group

Setup

To set up your
station hunt
destination for
the first time
7–10 ROLMphone 300/600 User Guide
If you want to prevent hunt group calls from
advancing to your phone, you can use the No-Hunt
feature to temporarily remove your phone from the
group. Hunt group calls will then skip your phone and
advance to the next phone in the group. This has no
effect on calls placed directly to your phone unless it
is in Do Not Disturb mode. (See "Do Not Disturb" on
page 6–3.)
If all members of a station hunt group remove them-
selves, hunting will not occur.
All but one of the members of a pilot hunt group can
remove themselves. If the last remaining member
tries to leave the hunt group, he or she will receive an
error tone.
Get a dial tone.
Dial # * 9 0.
You will hear the confirmation tone, followed
by the dial tone. If you have a display phone,
STATION HUNT is displayed.
Dial the primary extension of the member to
whom you want to advance calls.
You will hear the confirmation tone. If you
have a display phone, STATION HUNT and
your destination are displayed.
Hang up.
Join your hunt group, as described on page
7–13.