Siemens 300 Series User Manual page 99

To set up a
station speed key
on a display
telephone
Press the PROGRAM key. The PROGRAM
status light turns on. PRESS FEATURE KEY
OR DIAL CODE is displayed.
Press the Station Speed (SPEED) key, or dial
# # 3. SPEED DIAL is displayed.
Enter the Station Speed code you want to set up
(0 through 9, or 00 through 29 if you are set up
for more than 10 codes).
Either the dialing sequence or NOTHING
STORED is displayed. (You can view the con-
tents of other codes by entering those codes
now.)
Wait until NEW NUMBER? is displayed.
Enter the dialing sequence you want to assign to
the code. If you make an error while entering
the dialing sequence, press the CLEAR key to
cancel your changes and the enter the sequence
again.
If you want to set up another station speed code,
press the STORE key. STORED is displayed.
Before PRESS FEATURE KEY OR DIAL
CODE is displayed, repeat the three previous
steps.
To end setup, press the PROGRAM key. The
PROGRAM status light turns off, and
STORED is displayed.
Making Calls 3–35