Two-Way Speaker Call - Siemens ROLMphone 120 Series User Manual

Two-Way Speaker Call

The Two-Way Speaker Call feature lets you make a two-way call to
the speaker of another phone. If the other party does not have a
speakerphone, they must pick up the handset to answer.
To make a two-
way speaker call
To make a two-way call to the speaker of a phone within your com
group, use the Intercom Call feature. (See "Community (Com) Group
Speaker Call" on page 3-19.)
You can make a two-way speaker call to a DSS extension by pressing
the Two-Way Speaker Call (SPK2WAY) key and then pressing the
DSS key. (See "Direct Station Select (DSS)" on page 3-13.)
3-32 ROLMphone 120/240/400 Series User Guide
If one of the parties you have called lifts his
handset, a two-way (not speakerphone)
connection will be established with that
party. The other parties will be
disconnected.
A party you have called can disconnect by
pressing the line key or the Speaker key. If
this party is the last one in the multiple line
appearance, the call is disconnected.
Press the Two-Way Speaker Call
(SPK2WAY) key.
Dial the extension.
You will hear a single beep. The other
party will hear a double beep.
Begin speaking. If the other party does not
have a speakerphone, they must pick up the
handset to answer. You and the other party
will hear single beeps periodically until the
other party picks up the handset.