Siemens 300 Series User Manual page 101

To dial using a
station speed
code
To clear a station
speed code on a
display
telephone
Press the Station Speed (SPEED) key.
You will hear the confirmation tone, followed
by the internal dial tone.
Dial the station speed code.
OR
Get a dial tone.
Dial # 3.
Dial the station speed code.
Press the PROGRAM key. The PROGRAM
status light turns on. PRESS FEATURE KEY
OR DIAL CODE is displayed.
Press the Station Speed (SPEED) key you want
to clear, or dial # # 3. SPEED DIAL is
displayed.
Enter the station speed code you want to clear
(0 through 9). The dialing sequence is
displayed. (You can view the contents of other
codes by entering their codes now.)
Before NEW NUMBER? is displayed, press the
CLEAR key. DELETED is displayed.
If you want to clear another station speed code,
press the STORE key. STORED is displayed.
Repeat the three previous steps.
To end setup, press the PROGRAM key. The
PROGRAM status light turns off. STORED is
displayed.
Making Calls 3–37