Forced Authorization - Siemens 300 Series User Manual

Forced Authorization

To call an
outside number
when a PIN is
required
7–18 ROLMphone 300/600 User Guide
With the Forced Authorization feature, the system
will prompt you to enter a personal identification
number (PIN) to temporarily authorize you to call an
outside number from a telephone with limited calling
capabilities. Forced Authorization remains in effect
only until you hang up. When you make another
external call, the system will prompt you for your PIN
again.
Whether you are required (forced) to enter your PIN
to make an external call depends on the class of
service of the telephone you are using, the number
you have dialed, and the route the CBX uses to con-
nect you with a trunk (outside line).
Get a dial tone.
Dial 9 and the outside number.
Listen for the confirmation tone, followed by
the external dial tone.
Dial your PIN.
You will hear the confirmation tone.
Note
You can also dial your PIN before you dial 9 and the
outside number. It will then stay in effect as you dial
outside numbers, until you deactivate it.
The steps required to do this are the same as those
described for activating and deactivating your PIN in
"Remote Authorization" on page 7–19.