Features That Have Been Changed Or Replaced On Release 9006I - Siemens 300 Series User Manual

Features that Have Been Changed or
Replaced on Release 9006i
C–4 ROLMphone 300/600 User Guide
• Auto Intercom is no longer a separate feature. The
same result can be achieved by setting up a repdial
key for the Intercom feature access code followed
by the com group member's code.
• Automatic Camp-On is replaced by Busy Standby
Queuing.
• Call Detail Recording (CDR) Account Code is
now called Account Number to reduce confusion
with the term "feature access code." If your system
requires an account number, it is called a Forced
Account Number. Account numbers are used to
assign calls to accounts and are only checked for
length by the CBX.
• Call Pickup is now called Station Pickup and no
longer requires that you get a dial tone before
pressing the Pickup key. To pick up a call to another
extension, just press the Pickup key and then dial
the extension.
• Call Forwarding is now called Forwarding. The
Fixed Forwarding feature lets calls be forwarded to
up to two extensions, under different conditions,
and is set up at the CBX. The Variable Forwarding
feature lets you temporarily forward calls to
another extension or outside number that you
specify from your phone. You can specify that only
internal calls, only external calls, or both be
forwarded to the other number under all conditions.
Or, you can specify the particular conditions under
which all calls will be forwarded:
—when your extension is busy
—when your extension rings, but no one
answers (for a period of time configured at
the CBX)
—under both of these conditions