To change your
saved number
manually
3–28 ROLMphone 300/600 User Guide
Press the PROGRAM key. The PROGRAM
status light turns on. If you have a display tele-
phone, PRESS FEATURE KEY OR DIAL
CODE is displayed.
Press the Saved Number Redial (SAV/RDL)
key, or dial # 4. If you have a display telephone,
SAVED NUMBER REDIAL is displayed
followed by either the saved number or
NOTHING STORED. NEW NUMBER is then
displayed.
Enter the number you want to save. If you make
an error while entering the number, press the
CLEAR key to cancel your changes and then
enter the number again.
Press the PROGRAM key. The PROGRAM
status light turns off. If you have a display tele-
phone, STORED is displayed.
Note
You can also assign a frequently used number to a
repdial key. (See "Repertory Dialing (Repdial)" on
page 3–23.)