Table of Contents
Advertisement
On Version 6.3 and higher, the final member in a linear-pattern pilot
hunt group can forward calls to any other call-forwarding destination.
Removing Yourself from a Hunt Group
If you want to prevent hunt group calls from advancing to your
telephone, you can use the no-hunt feature to temporarily remove your
telephone from the group. Hunt group calls will then skip your
telephone and advance to the next telephone in the group. This has no
effect on calls placed directly to your telephone.
If all members of a station hunt group remove themselves, hunting will
not occur. All but one of the members of a pilot hunt group can remove
themselves. If the last remaining member tries to leave the pilot hunt
group, he or she will receive an error tone.
Set up your station hunt destination for the first time as follows:
1. Get a dial tone.
2. Dial
9
3. Listen for the confirmation tone followed by the internal dial tone.
4. Dial the primary extension number of the member to whom you
want to advance calls.
5. Listen for the confirmation tone and hang up.
Change your station hunt destination as follows:
1. Remove your telephone from the hunt group (see the next page).
2. Verify that both the member who is your current destination and
the one who will become your new destination have also removed
their telephones from the group.
3. Get a dial tone.
4. Dial
9
5. Listen for the confirmation tone followed by the internal dial tone.
6. Dial the primary extension of the member to whom you want to
advance calls and listen for the confirmation tone.
7. Hang up.
8. Rejoin your hunt group (see the next page).
9. Ask the member who is your new destination to rejoin your group.
.
0
.
0
Managerial Features 3-9
Advertisement
Table of Contents
