Nautilus E618 Service Manual page 90

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
!
wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure
location.
1. To remove the Console Junction Cover, pinch the sides to release the
side snaps, and then pivot it forward and off of the machine.
2. Using a 6mm hex wrench, remove the indicated hardware from the
Console Mast.
Console Junction
Cover
Console Junction
Console
Console Mast
90
Cover
Static
Handlebar