Nautilus E618 Service Manual page 114

1. With the machine turned on, set the resistance to the highest level.
2. Once the machine has reached the maximum resistance, turn off the
machine and remove the power cord.
To reduce the risk of electrical shock or unsuper-
!
vised usage of the equipment, always unplug the
power cord from the wall outlet and wait 5 minutes
before cleaning, maintaining or repairing this
machine. Place the power cord in a secure
location.
3. Using a #2 Phillips screwdriver, remove the 4 screws from each set
(right and left) of the Handlebar Shrouds. After removing the hardware,
pinch the Handlebar Shrouds to unsnap them from each other. Place
them safely aside.
4. Using a 6mm hex wrench and a 13mm wrench, remove the indicated
bolts from the Lower Handlebar Arms and Pedals. Set the hardware
safely aside for reassembly.
Be aware that the Handlebar Arms will be loose and may
pivot when the hardware is removed. This step may require
two people.
114
Handlebar Shrouds