Nautilus E618 Service Manual page 45

7. Plug the machine in and turn the power on to the machine.
Initial Setup
During the first power-up, the Console should be setup with the date, time and your preferred measurement units.
8. Date: Push the Increase/Decrease buttons to adjust the currently active value (flashing). Push the Left/Right buttons to change which segment is
the currently active value (month / day / year).
9. Push OK to set.
10. Time: Push the Increase/Decrease buttons to adjust the currently active value (flashing). Push the Left/Right buttons to change which segment is
the currently active value (hour / minute / AM or PM).
11. Push OK to set.
12. Units of Measurement: Push the Increase/Decrease buttons to adjust between "MILES" (Imperial English) or "KM" (metric).
13. Push OK to set. The Console goes back to the Power-Up / Idle Mode screen.
14. Turn off the power switch and remove the power cord.
45