Port Forwarding Rules - TRENDnet TEW-829DRU User Manual

TRENDnet User's Guide

Port forwarding rules

Network > Firewall > Port Forward
Port forwarding rules allow to create inbound rules from the WAN interfaces/Internet to
your internal computers or devices for specific services/protocols such as a file server
(FTP), IP camera, web server (HTTP/HTTPS), or remote access, etc.
1. Log into your router management page (see
on page 8).
2. Click on Network, click on Firewall, and click on the Port Forward tab.
3. Review the settings below. When complete, click Add to add the new entry to the list
and Apply to save and commit your changes.
 Name – Enter a name for the new port forwarding rule.
 Protocol – Click the drop-down list to select the protocol for the service to allow:
TCP, UDP, TCP+UDP, or Other.
 External Interface – Click the drop-down list to select the external WAN interface(s)
to allow: WAN1, WAN2, or WAN1+WAN2. For example, choosing WAN1 will only
allow the port forward to work on inbound connection requests on WAN1 only and
inbound connections requests on WAN2 will be denied.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your router management page"
 External Port – Enter the external port number for the service to allow.
Note: You can also enter a consecutive range of ports in the following format: 80-90
 Internal IP address – Click the drop-down list to select a device from the list or
enter the local/internal IP address of the device to forward the port/protocol
service.
 Internal Port – Enter the internal port number for the service to allow.
Note: You can also enter a consecutive range of ports in the following format: 80-90
Typically, the internal port or port range is same as the external port or port range.
 Schedule – Allows you to select a schedule when the port forwarding rule should be
enabled or disabled.
TEW-829DRU
46