View Your Router Logging; Configure Router Logging Settings And Setup External Syslog Server - TRENDnet TEW-829DRU User Manual

TRENDnet User's Guide

View your router logging

Status > System Log
Your router system log can be used to obtain activity information on the functionality of
your router or for troubleshooting purposes.
1. Log into your router management page (see
on page 8).
2. Click on Status and click on System Log.
Note: The router system log will display the most recent entries in the list.

Configure router logging settings and setup external syslog server

Administrator > System > Logging
You can adjust specific log settings to set what type of logging is displayed in the system
log and log buffer size.
1. Log into your router management page (see
on page 8).
2. Click on Administrator, click on System, and click on the Logging tab.

System log buffer size – You can increase or decrease the router buffer size.
Enter the buffer size in KB.

External system log server – This setting allows to send router logging to an
external syslog server. Enter the IP address of the external syslog server.

External system log server port – If sending logging to external syslog server,
enter the syslog port to use. By default, the syslog port is 514.

Log output level – This setting allows you to change the type of logging
displayed in the internal system log of router displays under Status > System
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your router management page"
"Access your router management page"
Log. Debug displays all logging messages and selecting another log level type
will only display those specific log messages along with any other levels above
it.

Cron Log Level – This setting allows you to change the type of logging send to
the external syslog server.
TEW-829DRU
99