Table of Contents
Advertisement
TRENDnet User's Guide
11. In the Local field, enter the local WAN1 IP address. (e.g. 172.16.0.1) This can also be
a domain name (ex: dynamic DNS host name)
12. Click
to add an additional IP address and enter the local WAN2 IP address (e.g.
172.16.0.80).
13. In the Local subnet field, enter the local LAN IP subnet. (e.g. 192.168.210.0/24) You
can add additional local subnets by click the add icon
14. In the Remote field, enter the remote WAN1 IP address. (e.g. 172.16.0.1) This can
also be a domain name (ex: dynamic DNS host name)
15. Click
to add an additional IP address and enter the remote WAN2 IP address
(e.g. 172.16.0.80).
16. In the Remote subnet field, enter the remote LAN IP subnet. (e.g. 192.168.200.0/24)
and click Apply. You can add additional local subnets by click the add icon
192.168.20.0/24)
© Copyright 2018 TRENDnet. All Rights Reserved.
Based on the example, the network settings will be the following:
(e.g. 192.168.30.0/24)
17. Under Authentication Key, enter the Pre-Shared Key (PSK) for the IPsec VPN tunnel
(e.g.
and click Apply. (e.g. 1234567890)
TEW-829DRU
80
Hide quick links:
Advertisement
Table of Contents
