Assigning Vlan Ids To Wireless Ssids - TRENDnet TEW-829DRU User Manual

TRENDnet User's Guide

Assigning VLAN IDs to Wireless SSIDs

Your router supports assigning specific VLAN IDs to wireless SSIDs to extend VLAN traffic
manageability and control to your router wireless network. By default, primary and
multiple SSIDs are assigned to the LAN (VLAN 1) IP network.
1. Log into your router management page (see
on page 8).
2. Click on Network and click VLAN.
3. Under VLAN VID:1 (LAN), click the Inter VLAN Routing drop-down list and select
Enabled and click Apply to commit and save the changes.
4. To create a new 802.1Q VLAN, under the VLANs section, click Add.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your router management page"
5. Under VID, enter the VLAN ID to assign to the new VLAN (4-4094, VLAN IDs 1-3 are
reserved for use with the default LAN, WAN1, WAN2 interfaces) and set the tagged
VLAN member port. Example: In the example below, we will create a new VLAN with
VLAN ID: 50 and assign port 8 as a tagged VLAN member port.
6. Enter the VLAN IP interface configuration under IP Address and Subnet Mask.
Example: In the example below, we will enter the VLAN 50 interface IP address as
192.168.50.1 and subnet mask 255.255.255.0.
TEW-829DRU
23