TRENDnet TEW-829DRU User Manual page 70

TRENDnet User's Guide
Note: For the VPN client computer, you will require a third party PPTP VPN software to
be installed configured matching the PPTP VPN settings on your router. Typically, PPTP
VPN software is pre-installed with most operating systems. Please refer to your
operating system or mobile device User's Guide/Manual for configuring the VPN
settings.
© Copyright 2018 TRENDnet. All Rights Reserved.
Below is a reference of the additional PPTP VPN server settings if you choose to make
other configuration changes to these sections.

Enable – Check this option to enable the PPTP VPN server.

Local IP – Enter an IP address for the PPTP VPN server. This should be the same
as your LAN IPv4 address to allow both access to LAN network and Internet to
VPN clients via full tunneling. (e.g. 192.168.10.1)

Client IP – Enter the IP address pool to distribute to your PPTP VPN clients after
they establish VPN connectivity. This should be in the same IPv4 subnet used as
your Local IP address. If using the same as the router LAN IP address, make sure
to assign a range different from your LAN DHCP server IP range. (e.g.
192.168.10.10-192.168.10.20)

MS-DNS 1 – Enter the IPv4 address of the primary DNS server to distribute to
PPTP VPN clients after they establish VPN connectivity. This parameter is
optional. (e.g. 8.8.8.8)

MS-DNS 2 – Enter the IPv4 address of the secondary DNS server to distribute to
PPTP VPN clients after they establish VPN connectivity. This parameter is
optional. (e.g. 8.8.4.4)

MS-WINS 1 – Enter the IPv4 address of the primary WINS server to distribute to
PPTP VPN clients after they establish VPN connectivity. This parameter is
optional. (e.g. 192.168.10.32)

MS-WINS 2 – Enter the IPv4 address of the secondary WINS server to distribute
to PPTP VPN clients after they establish VPN connectivity. This parameter is
optional. (e.g. 192.168.10.33)

Authentication – Click the drop-down list and select the authentication
protocol to use for PPTP VPN authentication, PAP/CHAP/MS-CHAPv1/MS-
CHAPv2. It is strongly recommended to use MS-CHAPv2 since it offers the
highest degree of security from these options and is supported by most
modern computers and mobile devices.
TEW-829DRU
63