National Instruments VXI-MXI-Express Series User Manual page 50

Safety
Note For UL and other safety certifications, refer to the product label or the
Product Certification
Electromagnetic Compatibility
In the United States (per FCC 47 CFR), Class A equipment is intended for use in
Note
commercial, light-industrial, and heavy-industrial locations. In Europe, Canada, Australia
and New Zealand (per CISPR 11) Class A equipment is intended for use only in
heavy-industrial locations.
Note Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical
equipment that does not intentionally generates radio frequency energy for the treatment
of material or inspection/analysis purposes..
Note For EMC declarations and certifications, and additional information, refer to the
Online Product Certification
© National Instruments
This product meets the requirements of the following standards of safety
for electrical equipment for measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
section.
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
• EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
• EN 55011 (CISPR 11): Group 1, Class A emissions
• AS/NZS CISPR 11: Group 1, Class A emissions
• FCC 47 CFR Part 15B: Class A emissions
• ICES-001: Class A emissions
section.
A-15
Appendix A Specifications
Online
VXI-MXI-Express Series User Manual