Vxi Interactive Control (Vic) - National Instruments VXI-MXI-Express Series User Manual

VXI Interactive Control (VIC)

© National Instruments
Figure 3-3. Successful In Access in the VISAIC Input/Output Tab
(This Window May Look Slightly Different for LabVIEW Users)
If the data value ends in
Instruments manufacturer ID from your VXI/VME controller's ID register.
You may now want to read the configuration registers from other VXI
devices in your system by opening the devices in VISAIC. Try reading a
register from each device listed in the MAX view of your VXI system. This
way, you can verify that your VXI controller can access each device in your
VXI system successfully. You can also access VXI and VME devices
configured in A16, A24, or A32 space by opening the VXI MEMACC
resource, which is VISA's representation of VXI memory. For more
information about VISAIC operations and commands, refer to the online
help in the Help menu and the context-sensitive help (such as What's
This?), available by clicking Help and mousing over any panel.
You can also use VXI Interactive Control Program (VIC) to control your
VXI/VME devices and develop and debug VXI application programs. You
can launch VISAIC (or VIC) from the Tools menu in MAX or from the
VISA or VXI subgroups in Start»Programs»National Instruments.
Chapter 3
, you have successfully read the National
FF6
3-9
Developing Your Application
VXI-MXI-Express Series User Manual