Ni Vxi-8360Lt Front Panel Features - National Instruments VXI-MXI-Express Series User Manual

Chapter 1 Introduction

NI VXI-8360LT Front Panel Features

Front Panel
VXI-MXI-Express Series User Manual
• Eight front panel status LEDs
– FAILED—Indicates the NI VXI-8360LT failed power on
diagnostics.
– SYSFAIL—Indicates the VMEbus SYSFAIL line has been
asserted by a device on the backplane.
– ONLINE—Indicates the board is detected by the
NI-VXI/VISA driver.
– ACCESS—Indicates a VXI bus master is accessing the
NI VXI-8360LT.
– CB—Indicates the circuit breaker has tripped from an over
current condition on the +5.0 V
NI VXI-8360LT.
– ACT—Indicates bus activity on the MXI-Express link.
– PWRGD—Indicates the on board power supplies are in
regulation.
– LINK—Indicates the MXI-Express link connecting the host
computer to the NI VXI-8360LT has been established.
• Two Trigger Bus Ports—These ports allow the user to daisy
chain the 8 M-LVDS backplane triggers and/or CLK10 between
multiple chassis.
• Three front panel SMB connectors for:
– Trigger input
– Trigger output
– CLK10 I/O
• One MXI-Express x1 connector
1-4
Features
rail of the
DC
ni.com